ABA blown film machine is an advanced plastic processing equipment with high efficiency, stability, and reliability, providing important support for the production of various plastic products. With the continuous development and progress of technology, the performance and functions of ABA blown film machines will continue to improve, injecting new vitality and momentum into the development of the plastic processing industry.

When using the ABA blown film machine, operators need to pay attention to the following points: regularly check the operating status of the equipment and the degree of wear of each component to maintain the normal operation of the equipment; Secondly, select suitable plastic raw materials and control the extrusion temperature and speed to achieve the desired film production effect; Perform subsequent processing techniques such as spray cooling and paper roll wrapping to ensure more stable film quality.

What are the requirements for installing ABA blown film machine?

Power supply: ABA blown film machines usually require high-power power supply, so the installation site needs stable power supply and qualified power wiring conditions. Professional electrical engineers are responsible for electrical wiring work to ensure that the equipment can operate normally.

Ground leveling: The ABA blown film machine needs to be placed on a flat ground during installation to ensure the stability and safety of the machine during operation. The ground flatness requirement is within a certain range, and the ground has been professionally measured and adjusted.

Environmental temperature: The ABA blown film machine generates a certain amount of heat during operation, so the installation location needs to maintain a suitable environmental temperature to avoid affecting the normal operation of the equipment due to excessively high or low temperatures. It should usually be kept between 5-40 degrees Celsius.

Ventilation conditions: The ABA blown film machine generates a certain amount of exhaust gas and heat during operation, so good ventilation conditions are needed to ensure that the exhaust gas can be discharged in a timely manner and avoid affecting the operators and equipment.

Water source and drainage: ABA blown film machine may require water source during operation, such as cleaning equipment or cooling equipment, so the installation location needs to have convenient tap water supply and drainage system.

Ventilation and exhaust system: It is necessary to provide good ventilation around the equipment to avoid the impact of exhaust gas and heat generated during machine operation on the environment and operators.

Stable support of the machine: ABA blown film machine has a large volume and heavy weight, so it is necessary to ensure that the equipment has stable support and fixation during installation to avoid damage or abnormal operation caused by machine shaking or tilting.

ABA blown film machine is a commonly used plastic film production equipment, mainly used for producing plastic bags, plastic packaging films and other products. It adopts ABA structure, which means there are two sets of extrusion systems on the same extruder, and each system extrudes two different types of plastic raw materials. One of the extrusion systems is called the A layer, the other is called the B layer, and the middle layer is the C layer composed of A and B layers.

ABA blown film machine has the advantages of fast extrusion speed, high production efficiency, thin and light film quality, high transparency, and good stretchability. It can produce films of various specifications and thicknesses to meet the needs of different fields. At the same time, the device can also be customized and designed according to customer needs, providing personalized solutions.