Hotline
13354065688
Dalian Longyao Plastic Machinery Co., Ltd.
Contacts：Manager Xu
Mob：13354065688
Tel：0411-86268088
0411-86268988
BM：0411-86265066
Web：www.www.openturto.com
Email ：xu86268088@126.com
Add：Lushun lime kiln, Dalian, Liaoning Province
Solution to wrinkle on film surface produced by film blowing machine
1) The head is installed unevenly and the film thickness is uneven. It is necessary to correct the levelness of the head.
2) If the cooling is insufficient or uneven, improve the cooling efficiency of the cooling air ring to fully cool the membrane bubble.
3) The clamping plate or traction roller is not aligned with the center of the machine head, and the center line shall be aligned
4) If the included angle of the splint is too large, reduce the included angle of the splint
5) If the tension of the traction roller is inconsistent, adjust the traction roller
6) If the crimp tension is not constant, the friction force should be adjusted.
Contacts：Manager Xu
Mob：13354065688
Tel：0411-86268088/0411-86268988
BM：0411-86265066
Web：www.www.openturto.com
Email ：xu86268088@126.com
Add：Lushun lime kiln, Dalian, Liaoning Province
Mobile station
Copyright ?Http://Www.www.openturto.com/En/ Dalian Longyao Plastic Machinery Co., Ltd Specializing inPE Film Blowing Machine,Three Layer Coextrusion Film Blowing Machine,ABA Film Blowing Machine, Welcome to inquire!
遼ICP備14017684號 Powered By Xiangyun platform Technical support: joint enterprise Era
